Fiber Optics
Our Fiber Lab contains state of the art equipment and qualified technicians for filling your fiber optic needs.
|
Specialized equipment is used to prepare the fiber end for termination into the connector body. The outer jacket and filler material is removed exposing the fiber strand. |
|
|
|
| After assembly, the fiber connector is placed in a polisher where imperfections are removed from the fiber tip. |
|
|
|
|
|
Next, we visually inspect the polished end with a video microscope. Any imperfections become immediately visible and can be re-polished if necessary. |
|
|
|
| Now the assembly is ready for final test. All fiber cables are fully tested to meet or exceed industry standards. Certified documented testing is available on request. |
|
| Fiber Assemblies available in 50 or 62.5 micron... XX=Length | ||||||
| Singlemode/Duplex | STSTDSM-XX | STSCDSM-XX | SCSCDSM-XX | LCLCDSM-XX | LCSTDSM-XX | LCSCDSM-XX |
| Multimode/Duplex | STSTDMM-XX | STSCDMM-XX | SCSCDMM-XX | LCLCDMM-XX | LCSTDMM-XX | LCSCDMM-XX |
| Singlemode/Simplex | STSTSSM-XX | STSCSSM-XX | SCSCSSM-XX | LCLCSSM-XX | LCSTSSM-XX | LCSCSSM-XX |
| Multimode/Simplex | STSTSMM-XX | STSCSMM-XX | SCSCSMM-XX | LCLCSMM-XX | LCSTSMM-XX | LCSCSMM-XX |
